CZS Sheet Metal Cutter Drill Attachment, Electric Drill Shears Attachment Cutter Nibbler, Metal Nibbler Drill Attachment for Cutting Iron, White Sheet, Steel, Copper, Aluminum
$19.99
Price: $19.99
(as of Aug 08, 2025 14:03:55 UTC – Details)
Product Description
This sheet metal cutter drill attachment is installed on the electric drill, and uses the power of the electric drill to drive the circular gear cutter to cut the metal sheet.
Electric drill shears attachment cutter nibbler has a faster cutting speed than other sheet metal cutting tools, powerful than ordinary scissors and knives, it can save a lot of work time, Improve efficiency. It is not only a metal cutter, but also a cardboard cutter.
This metal nibbler drill attachment can handle iron plate 0.3-1mm, iron sheet 0.3-1.2mm, steel plate 0.8-1mm, copper plate 1.5mm, aluminum plate 1.5mm, cardboard 2mm.
The metal cutter drill attachment quickly transforms your drill into an electric shear that fits perfectly on the chuck of your drill. It has strong practicability, simple operation and safe use.
The electric drill shears is suitable for cutting flat sheet metal less than 1mm. Do not cut with angular, special shape, welding materials.
Customers say
Customers find the metal cutter works well, cutting flat metal like a hot knife on butter and being faster than hand shears. The tool receives positive feedback for its value and effectiveness, with one customer noting it’s useful for various projects. While some customers say it’s super easy to use and fits their Dewalt Drill, others report issues with assembly instructions and compatibility with Ryobi cordless drills. The build quality receives mixed reviews, with several customers describing it as cheaply made.
13 reviews for CZS Sheet Metal Cutter Drill Attachment, Electric Drill Shears Attachment Cutter Nibbler, Metal Nibbler Drill Attachment for Cutting Iron, White Sheet, Steel, Copper, Aluminum
Add a review
Related Products
$19.99
Cammi Moore –
Works ðª Great!
Love this tool, makes cutting simple and is easy to use!
Ethon –
Excellent Tool â Powerful and Precise!
This rebar cutter exceeded my expectations! It cuts through steel like butter and saves so much time on the job. The build quality is solid, and itâs easy to use even for long periods. A must-have for any construction site or DIY project involving rebar. Highly recommend!
Pothen –
Not a single shaft/screw is straight
Not a single shaft is straight. The hex bit the drill attaches too? Wobbles really bad when you run the drill. The hand handle that screws in? The screw is set at about 10 degree angle, not straight. The screw that holds the metal piece/wire/bar that holds the unit against the drill handle? The screw was tweeked, didnt screw in straight. This thing was hobbled together and has horrible fit/ I guess the finish was okay, thats about it.Not even close to being worth the money.
barry burnette –
Works
This is working pretty good. We are using it on 5v sheet metal performs really good on ripping longways (not a cross the ridges but a little more trouble going across the ridges. Set up manual available but no user manual available.
Avtomat Kalashni –
If you do not have metal cutting experience this tool is not for you
Was skeptical about this with the reviews…but…bought it anyway.I think I see and understand the negative reviews and have some things to add to help clarify.1st. I used this on metal…22g and it cuts it just fine…the reason I bought it was to cut squares of flooring to use as pads/silencer pads to quiet the steel weights in my test weight carts.I had pictures of me cutting the steel sheets and the flooring (vct or whatever they call that stuff) but can not find the pics this is all i could find.2nd. The flat outer non knurled wheel is adjustable…it need to be run in and have the same pressure against the other wheel as a pair of tin snips/hedge trimmer blades have against each other. Too loose and you will get the cuts like you see in the pictures posted….too tight and it will bind up and not cut well.3. Add a bit of oil to the blades to help the disks slide over on another.. remember you are tightening them to one another.4. Use a variable speed drill on a very very slow speed….the slower I went the better/smoother/straighter my cut was. Don’t use an impact driver…5. Get the angle right on the drill and duct tape a paint stir stick to the back of it to let the stick ride on the metal and it hold your drill at the right angle to you can concentrate on steering and pushing. Plan your direction of cut…this tool operates the same way red and green snips do…..IT IS DIRECTIONAL WITH THE UP AND DOWN PUSH!Do those things and this little tool is a great little cutter. Don’t think for a second you are going to use it for a construction tool or industrial use or even to cut all the panels on your new barn roof. But for the occasional cutting and light use this is a good little tool.For 20 bucks don’t thing you are going to replace your kettle shears or nibbles or even your red and green wiss snips.
Tracy Lindsey –
Decent product.
They cut good but are hard to control.
Noneya Business –
Great Tool/Accessory For A Great Price
I would recomend this to anyone as its not only a universal attachment that actually does its intended purpose for around $20 but its also well made with quality materials and a simplistic design (a simplistic design is a good thing that makes stuff easily Repairable/Repurposable) and as millenial and a Baby Boomer Roofers son i like it when a construction tool/accessory has a bit of weight to it.Â
Dale –
Works Great Good Price
Why did you pick this product vs others?:Looked simple to operate and was a decent price. It cuts steel roofing very well, in fact works a bit better than the Dewalt cutter.Value for money:Good value for what you are paying. We will see how long it lasts.
Neil –
Easy to assemble and fit fine inside my Ryobi drill.I have had a pile of cardboard moving boxes as well as some large shipping boxes sitting in my garage for a couple of years that I’ve been dreading slicing up. This tool allowed me to cut them into nice little squares and have them out with the weekly recycle. I also was able to cut up some scrap HVAC pipes I had lying around to fit them neatly in a box and save some space.For the price, this tool is excellent to have around to avoid having to use shears and/or knives to deal with things. Safer and much easier on the hands than using shears.
Antony Muffett –
Works well
Andy –
Product is excellent and cuts metal very fast. Should have bought one years ago
TMNW –
Good productWorked well but be sure you have a drill capable of generating torque and run at a fairly slow rpmI found the handle mounting bracket for the drill was too small to use on any of my drillsThe side hand hold works wellIâm cutting 22 gauge sheet with no issue
Island Living –
Just doesn’t work. I spent over an hour adjusting and adjusting the cut blade and the spin blade. Best I could get was 1/2″ of garbled metal. Regular tin snips do a far better job. If you are looking for some way of cutting metal roofing panels, this is NOT the solution.If i could return it I would but missed the cutoff window.