Magic Tub and Tile Refinishing Kit – Spray on Aerosol – Refinish Sinks Tile Porcelain Acrylic Fiberglass and Ceramic Surfaces, Bright White, 12 Ounce (Pack of 2)
Original price was: $55.48.$39.99Current price is: $39.99.
Price: $55.48 - $39.99
(as of Aug 10, 2025 07:25:28 UTC – Details)
Product Description
Stained Tubs & Tile Can Look New Again!
DIY Tub & Tile Spray-On Refinishing Kit
Magic Tub & Tile Refinishing Spray On Kit is a great solution for giving your bathroom sink, tub or tile a fresh long-lasting finish. This high performance, one part epoxy is specially formulated to stand up to moisture and make your fixtures look like new. Avoid the hassles of remodeling projects by restoring life to your existing fixtures.
Replace or Refinish?
Some Stains Just Won’t Come Clean
If you have tried everything to clean old stained, rusted tubs & tile and you’re still unsatisfied, refinishing can be a great cost-effective option to get the like-new look you desire. The bright white, clean results are worth the time and effort! Each kit covers 35-45 square feet.
Do I need to prep my tub & tile before I begin refinishing?
YES – The prep work is very important to achieve the best results. The bathroom itself will need some prep work and the surface will need to be cleaned & prepped as directed before you begin spraying. Refer to instructions inside the packaging.
Will I need any additional items to use this refinishing kit?
YES – Required items include: Safety glasses, rubber gloves, abrasive scrubbing pad, abrasive cleaner, TSP (Trisodium Phosphate) Cleaner, bucket, #400/#600 grit wet/dry sandpaper, tack cloth, masking/painters tape, drop cloth or masking film.
How many coats of paint are needed, and how long does the paint take to dry?
For most projects, 2-3 coats are sufficient. Do not add additional coats more than 6 hours after the application of the first coat. Allow your final coat to dry at least 72 hours before exposing to water.
Do I need to be concerned with ventilation?
YES – You will need to ensure you have properly ventilated your area by opening windows and/or using fans before you begin using this product.
How Long Will This Take Me?
PROJECT SCOPE:
The total project time will depend somewhat on the size and condition of the surface you are refinishing. You should plan to dedicate at least 2-3 hours of time for surface preparation and application of the first coat. Most projects will require 2-3 coats. Allow for 30 minutes of drying time between each coat. The final coat should be applied within six hours of the application of the first coat and should be left to dry for at least 72 hours before exposing to water.
Product Dimensions : 2.71 x 5.34 x 8.3 inches; 1.15 Pounds
Item model number : Refinishing Kit
UPC : 070048031885
Manufacturer : Weiman
ASIN : B07HXBC9GF
Units : 1 Count
Best Sellers Rank: #39,620 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #25 in Household Countertop & Tile Paint
Customer Reviews: 3.9 3.9 out of 5 stars 2,306 ratings var dpAcrHasRegisteredArcLinkClickAction; P.when(‘A’, ‘ready’).execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( ‘acrLink-click-metrics’, ‘click’, { “allowLinkDefault”: true }, function (event) { if (window.ue) { ue.count(“acrLinkClickCount”, (ue.count(“acrLinkClickCount”) || 0) + 1); } } ); } }); P.when(‘A’, ‘cf’).execute(function(A) { A.declarative(‘acrStarsLink-click-metrics’, ‘click’, { “allowLinkDefault” : true }, function(event){ if(window.ue) { ue.count(“acrStarsLinkWithPopoverClickCount”, (ue.count(“acrStarsLinkWithPopoverClickCount”) || 0) + 1); } }); });
REFINISH YOUR BATHROOM: Give your sink, tub or tile a fresh, long-lasting finish. Magic Spray-On Tub & Tile Refinishing Kit works great on ceramic, porcelain, fiberglass, enamel-coated cast iron and acrylic tile, tubs or sinks.
HIGH PERFORMANCE: Our one-part epoxy is specially formulated to stand up to moisture and make your fixtures look fantastic. Please note that this does carry a strong odor. We recommend wearing a mask and making sure the area is well ventilated.
COMPLETE INSTRUCTIONS: Let’s be real. Refinishing your bathtub is a lot of work, but we think it’s worth it in the long run. We’ll give you a step-by-step guide that covers surface prep to final coats and clean-up. We’ll even remind you to use a TSP cleaner and cover anything you don’t want misted.
SAVE MONEY: Refinishing your bathroom can get costly quick. Magic Spray-On Tub & Tile Refinishing Kit is here to slash costs so you can make your bathroom look amazing without breaking the bank on new fixtures or a contractor.
COAT COVERAGE: This product provides two coats to an average size bathtub. It covers roughly 22 square feet.
Customers say
Customers report mixed experiences with the tub refinishing kit’s functionality, with some saying it works well while others find it ineffective. The shine aspect also receives mixed feedback – while some say it makes tubs look new, others mention it’s hard to achieve a nice finish. Additionally, the product has a strong, toxic smell that customers find unpleasant.
8 reviews for Magic Tub and Tile Refinishing Kit – Spray on Aerosol – Refinish Sinks Tile Porcelain Acrylic Fiberglass and Ceramic Surfaces, Bright White, 12 Ounce (Pack of 2)
Add a review
Related Products
Original price was: $55.48.$39.99Current price is: $39.99.
preciousad –
Strong Smell, but Awesome Product
I’m renovating my son’s bathroom that has the old, pink, trim tiles and tub. I’ve never painted tile before so I taped everything off and had the idea to use Kilz primer on part of the trim tiles first to see if that would help with covering the medium pink color. It did, but it’s totally not necessary to use primer first. I used just this spray on the wall tiles part of the bathroom to see which way is better and it’s much better by itself and this product comes out smoother and shinier without using a primer first. It’s not a thick spray, normal spray paint consistency, so it leaked a tiny bit under the tape along the grout line, but was really easy to clean up my lines with some careful sanding after it dried. Comes right off with sand paper, but not my nails when I scratched it so see how it holds up. The smell is a beast so figure out how to ventilate the area and wear a painter’s mask if it bothers you too much. I just took lots of breaks, kept the bathroom vent fan running, and had a standing fan blowing in the room to keep the air moving. It took two coats to cover the pink completely and looks perfect. I’ll add pics of before and after when I finish the bathroom completely.
Angel –
Me funcionó bien
Me funcionó bien
adrea scanlon –
Save your money!
Horrible product! Used on my camper tub, toilet, and sink which has turned yellow over the years. The smell was very strong! Even with a respirator and both bathroom vents and all windows open, I had to keep running out to catch my breath. Bought 3 kits and 2 of the 6 cans were defective and splattered when sprayed. It sprayed on splotchy even after 3 full coats with holding can at 10-12 in from surface. Did not spray upside down well like advertised. And dried with a matte finish..no shine whatsoever making it look very cheap would chip off when running nail lightly to test for durability. I normally am not picky and could look past these things however to the touch the surface was very rough and knew I could never enjoy taking a shower in this awful space. Bought a paint on tub refinishing paint and am already very pleased with it after 2 coats!
Finney –
Easy, affordable solution to a crappy landlord
I just moved into an apartment a month ago with VERY questionable maintenance staff. I wish I’d known that prior to the move, but of course they won’t tell you they half-ss everything.Two weeks after I moved in the VERY poorly done tub re-coat they had done started to peel up in sheets. 2 foot long chunks were coming off in my hand, and I was leaving the shower with paint chips stuck to my body. Management’s solution was “Don’t worry about it, we redo it after every tennant. But I guess if it bothers you we can have someone spray on another coat.”Aaaaand there we have it. They didn’t prep, probably didn’t even clean, just “sprayed on another coat”.Obviously I would get the same results if they did it, so I bought this kit to give a try myself. Because it’s a rental and because I don’t plan to stay here long (for obvious reasons), I didn’t want to spend much. I wasn’t looking for perfect results, just something that looks acceptable and doesn’t peel.I’m moderately handy with small household repairs and projects. I’m very far from a pro, but I can do basic things well, I usually know the proper tools and methods to use and I get good results. Not always perfect, but looking good and working right. I can’t build or remodel, but I can fix things well enough. Just to give some background on the “type” of person giving this review – not a pro, but not a total novice.I was impressed by the directions and think a total novice COULD use this kit, though. It very clearly tells you what you need, what things are necessary and which are optional, and gives easy to follow step by step instructions.The process could be done by anyone with basic use of their hands and minimal strength and the ability to bend and squat. The prep is time consuming but not physically difficult. You basically remove any peeling coating, clean, sand, clean with TSP, wipe, spray.FOLLOW THE DIRECTIONS EXACTLY. Use TSP cleaner. Your “regular” household cleaner IS NOT GOOD ENOUGH. If you prep properly, you’ll get good results that last.You NEED good ventilation and at very least an N95 mask. The fumes are strong during application but quickly dissipate to just the smell of fresh paint as the product dries. Cover ANYTHING you don’t want mist on. That’s really my only complaint with this product, is there is a lot of mist/overspray.The 2 cans in the kit covered a VERY crappy looking tub well. If you want to do a surround as well you’ll probably need another kit.I can’t comment on durability – I won’t be in this apartment long enough to tell how it lasts. But I’m happy with how it turned out. I’ve included pictures of the extent of the peeling I was dealing with, and the finished tub.If I wanted to do it absolutely perfectly, and not at all see where the old paint was, I’d have wet sanded the whole darn thing and started from zero. It is not my property, I shouldn’t have had to do this anyway, “good enough” is good enough. I’m very happy with the results. The coating covered well and you have to REALLY look to see where the old, peeled paint was. If you took the time to remove all old coating, you’d get excellent results.This was a good, easy fix for someone else’s problem. Just remember to DO THE PREP and you’ll be fine.
DAVID A. –
Excellent on my fiberglass shower tub. Shiny. Nice, easy spraying
I did the bottom of my fiberglass 5-foot tub which had three cracks I had repaired with epoxy.These repair spots were certainly going to give a potential buyer of my house a negative feeling.(Whether people consciously see defects or not, they see them subconsciously.)I put 4 coats on the bottom of the tub (2 would have been fine), using up one of the two cans. IT LOOKS GREAT! SHINY! AWESOME!Follow the directions! Clean it well. Spray it on at a high room temperature so when the coatings cool they are in compression (as opposed to applying cool, causing the coatings to expand and crack when the room gets warm). I am allowing it to cure at a high room temperature for the recommended 72-hours.I did not rate Durability, but with the excellent-and-easy spraying and the awesome shiny coating, I am fairly confident that it will last.
Sarah –
Il n’y a aucune video explicative ou bien de tuto sur le produit. Par consequent ce n’est pas simple à appliquer. En outre, le mot kit est mal choisis : il ne vient avec aucun materiel nescessaire tel que gant masque, couche de protection. C’est uniquement la peinture en spray. Finalement, le prix est cher comparé aux autres peintures pour bain sur le marché. Bref, erreur d’achat et impossible de le retourner 🙁
Danya C. –
I used this product to refinish a steel bathtub. I read the instructions and made sure preparation was done carefully to get the best result. Sadly, the finish was very rough throughout. I was very disappointed as a lot of time and effort was put into this only to get these results.
Amazon Customer –
Very rough finish. Chips easily. Don’t stare at it too hard, it might chip again.