TORACK Bike Storage Rack, 6 Bike Rack Wall Mount Home and Garage Organizer, Vertical Bicycles Hanger Hooks for Indoor Space Saving
Original price was: $49.99.$38.99Current price is: $38.99.
Price: $49.99 - $38.99
(as of Sep 23, 2025 05:28:21 UTC – Details)
Product description
Bike Storage Racks for Garage
Suitable for Multi-Size Bikes
TORACK bike rack garage could accommodate 6 bicycles. The wall mount bike rack is strong enough for most kinds of bikes, like mountain bike, road bike, folding bike, adults bike and kids bike etc. Suitable for all up to 4.4 inch fat tires for bikes!
A Nice Bike Organizer for Garage
TORACK organization system, the bike rack is able to used with other TORACK organizers. Such as, upgraded garage racks, pegboards, hooks.
Features of TORACK Bike Racks Made of Stainless Steel Powder-coated Finish Rails Rubber-coated Sleeves Hooks All Bikes Mounted Space Saver Adjustable Heavy Duty Hooks Great Garage Organizer Longer Lifetime
More Details About TORACK Bike Storage Rack
Adjustable Hooks
When your needs change, the position of the hooks is adjustable. The bike hanger makes bicycles off the floor to free up some valuable room for your garage.
Super Material for Durability
Powder-coated steel for durability-resists of rusting, chipping and cracking, rubber-coated sleeves are scratch-resistant.
Package Included
3pcs 16″ steel rail, 6pcs bike hooks and serval screws. Bike storage rack can hold up to 300 lbs and each hook could hold about 50lbs.
Add to Cart
Customer Reviews
4.1 out of 5 stars 336
4.5 out of 5 stars 260
4.3 out of 5 stars 578
4.6 out of 5 stars 669
4.8 out of 5 stars 449
4.7 out of 5 stars 186
Price
— no data
— no data
— no data
$79.99$79.99 $25.99$25.99 $58.99$58.99
Storage Type
Wall Mount Wall Mount Wall Mount Wall Mount Wall Mount Wall Mount
Weight Capacity
100lbs 132lbs 270lbs 800lbs 30-75lbs 500lbs
Material
Solid Steel Solid Steel Durable Plastic Solid Steel Solid Steel Solid Steel
TORACK System Compatible
✓
✓
✓
✓
✓
✓
Number of Attachments
11 10 80 42 75 17
Powder-coated Finish Rails & Rubber-coated Sleeves Hooks
CUSTOMIZED BIKE STORAGE SOLUTIONS- Pretty rail interlock design, seamlessly combine rails. 16-inch * 3-pack rails & 6 hooks can be separated or interlocked wall mounted to display or hang your bike. TORACK’s snap hook design makes it easy to snap on the rails and adjust the hook spacing.
WALL-MOUNTED SPACE-SAVING- Bike wall racks for garage organizers get your bikes off the floor and make it easy to organize and clean your home and garage. Wall-mounted 6 bike rack saves space effectively.
WIDE SIZE HOOKS for BIKE HANGER- Hang up to 4.4-inch fat bike tires. Suitable for mountain bikes, road bikes, folding bikes, hybrid bikes, adult bikes, and kids bikes, scooters, etc. Wide size hooks make hanging up and taking down your bike an easy task.
DURABLE MATERIAL- Powder-coated rails & rubber-coated sleeves. Excellent durability with anti-rust, anti-crack, anti-scratch, and anti-slip functions. Heavy-gauge steel construction provides safety loading up to 400lbs. Certified by GS. Safety Guaranteed.
EASY TO INSTALL- All you need is an electric drill, and perhaps a level to ensure that it is lined up in a row for mounting on the studs on the wall. WALL STUDS SPACING: 16 INCHES! Install to drywall or other paneled wall sheeting, must be located to solid structures. (Includes all installation hardware.)
Customers say
Customers find the bike rack easy to install and appreciate its functionality and ability to save space in garages. The rack receives positive feedback for its quality. However, the sturdiness and size receive mixed reviews – while some find it sturdy, others report issues with hooks breaking after two months of use, and several mention it won’t hold six bikes. Moreover, the anchor strength is a concern, with customers reporting that the hooks don’t stay on properly. Safety is also mixed, with one customer noting it keeps bikes off the floor, while others express concerns about security.
8 reviews for TORACK Bike Storage Rack, 6 Bike Rack Wall Mount Home and Garage Organizer, Vertical Bicycles Hanger Hooks for Indoor Space Saving
Add a review
Related Products
Original price was: $49.99.$38.99Current price is: $38.99.
RAmazon Customer1 –
The ultimate garage space saver!
Super functional. Because of the design hanging on the wall it frees up a lot of space in your garage. Great for smaller spaces. Theyâre very stable and hold extra large bike frames with ease. Theyâre easy to install and took my husband under an hour. The bikes are stable while one the rack and very safe while hanging. I donât worry about my toddler walking by them. Great value!
Eva Everlasting –
Great space saver!
Put this rack up in our shed and it saves so much space!! Good quality and easy to install.
simataas –
A solid 4 stars – could be improved.
Can you hang 6 bikes with this rack? Yes, but not as pictured on the product page with all three sections of rack being mounted side-by-side and flush together. It’s important to center each rack across wall studs, or mount on wood paneling that is anchored into wall studs. Two bikes can fit on each section, but there must be spacing between the racks.This rack system is not made specifically for bicycles. In fact, the literature that comes with the rack doesn’t even mention bicycles – it shows an assortment of attachments and tooling. It’s safe to say that bikes would be the heaviest thing this rack system can handle, and proper mounting is key for stability and safety. Hanging & removing bikes from the rack takes care; pulling down on the bike could bend the hook, break the mount, damage the bike, or even cause injury. It’s not something I want my younger kids doing, so only larger bikes for older children will be mounted at our house.Tips (also see pictures):⢠Determine how high to mount the rack by measuring and eyeballing your largest bike – lift it up off the ground as far as you want it to be and take note of the top of the front tire. The bottom of the rack should be mounted between 3 – 6 inches below the top of the front tire. My wall is unfinished, so I used the 3-inch approximation (no, I did not measure – just eyeballed).⢠Once you mark the desired mounting position/height, use a level to draw a line on two studs. Place the rack on the line and center it between the studs. Use the rack as a template to mark the screw position.⢠See how close to the edge the screw holes are? Yeah, that’s my biggest complaint with this product – it needs to be about an inch wider for standard wall stud mounting. Make sure to pre-drill those holes to ensure screws are driven in straight and the studs do not split!⢠Once the rack is mounted, pop two large hooks on each end as far apart as possible.⢠Different size bikes should be mounted side-by-side on the same rack to minimize petal & handlebar interferences.I rate this as 4 vs 5-stars because the racks are not wide enough for optimal mounting on studs, and I am somewhat concerned that bicycle weight may be pushing the design limits.
Kayla Hudlow –
Excellent affordable option!!!
These worked so great! I took some wood and secured it to some studs in the garage wall. And then screwed each bracket to the piece of wood. Each bracket holds two bikes. Completely secure and wonât pull out of the wall.
Christopher Abplanalp –
This was very easy to install and helps with storing my bikes
This product was very easy to install, and help my new garage get organized, I mean it came with 6 hooks to snap on but not sure how 6 bikes will fit, all I needed was 5 and it works perfectly to save room in my garage come winter.
Will Seese –
Holes are 15 1/8 inches, not 16â
The overall length of each unit is 16â, however, the drill holes are 15 1/8â apart, so youâre only going to hit a stud on one side. They provided drywall anchors with this unit, likely for that reason. If you put one end in a stud and drywall anchors on the other end, it will rip out of the wall as soon as you hang just one bike. We tried it and with just one bike, which was a carbon bike so extremely light, and the rack ripped right out of the wall and bent the rack in about 1-2 seconds. The rack is supposed to hold more than one bike and most bikes are made of aluminum which is heavier than the carbon bike we put on it, so the only way this rack can work is if your studs are a little closer than 16â and if they are exactly 16â on center you might get lucky and grab a little edge of the stud. We are going to go to the hardware store and buy a 2×4 board and drill that directly into the studs and then weâll mount the rack to the 2×4. That should work, but it wonât be pretty and requires the purchase of the wood, which is expensive right now and of course the trip to the hardware store. For these reasons, Iâm giving 1 star.
Tricia Burrell –
Good product, but only room for 3 bikes not 6.
Rack only had enough room for 3 bikes not six. Rack itself is a good product.
RickG –
Design allowed for 3 separate racks to allow space for the bikes and even different heights
I think that having the entire 6 bikes altogether would have been too tight, but spacing each section to separate joists worked well so far. I was able to hang at different heights to make it easier for the kids to hang their bikes.Easy install with 4 screws each section that were included. I don’t have drywall hung, so I didn’t need to use the mollys that came with it.