Kreg DB210 Foreman Pocket-Hole Machine, Blue
$399.00
Price: $399.00
(as of Sep 25, 2025 22:42:33 UTC – Details)
Product description
Efficient
Allows you to work with twice the speed and half the effort of a standard pocket-hole jig.
Easy to Use
Create pocket holes with amazing speed and accuracy time and time again.
Portable & Durable
Perfect for long-time use in your shop, around your home, and on the go.
Easy Woodworking Tools: Kreg pocket-hole joinery is the fast, strong, easy way to join wood-drill, drive, and done
Fast, Precise Pocket Holes: The Foreman Pocket-Hole Machine works with twice the speed and half the effort of manual pocket-hole jigs
Premium Home Improvement: This 20 lb pocket-hole machine is portable and fast at every jobsite
Accurate Woodworking Tools: This pocket-hole jig has a tool-free adjustable fence that offers precise depth
Premium Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome
Customers say
Customers find the pocket-hole machine saves significant time, with one reporting a 75% reduction in drilling time, and appreciate its quality construction and ease of use, particularly noting the quick setup process. The tool delivers accurate results, taking about 2 seconds per hole, and customers consider it worth the price. While customers like the machine’s movement, with one noting it can move on to the next hole immediately, opinions about clamping strength are mixed.
richard page –
Repeatable, accurate, fast!
Consistent, accurate. BIG time saver over small pocket jigs. If you have to make a cabinet or two, this is the only way to go!
Shaner’s Custom Woodworking LLC –
I should have purchased this 6 months ago
I had just started an at home small custom Woodworking business and pocket screws are my go to fastening method. Over the past 3 months I have made over 30 corn hole boards, which each set I put 48 pocket holes in to attach the frame together and the frame to the top. It would typically take me half an hour drill all of the holes for 1 set. With this machine, I was able to do 6 sets in 45 minutes, and that included the time to change the spring stops. This machine is a great tool for anyone who uses pocket screws! After boring over 250 holes in less than an hour, all of the holes were consistent, clean, and it was all done pain free. No straining of the shoulders or arms with this! The initial setup, out of the box, took about 20 minutes to hookup the dust hose, put it in place on my work table and screw it down. Setups of the spring stops took about 5 minutes each time to get them located right, but once they were tight they were so easy to use to bore my holes. For the price and ease of this machine, any woodworker should have this in their workshop. The only thing you will regret is not purchasing it sooner!
cookies_is_good –
Best Tool Ever
I am already a big Kreg fan, so I had high expectations. I’m no professional, but I do a good bit of home projects. This was a bit of an investment for me, so I really needed/wanted it to work… and it delivered. Thank you to Kreg for such awesome products. It just works and it does so consistently. It’s so much faster than the Kreg Jig (although I do really still love my Kreg Jig, this is just way faster for many pocket holes.) It’s easy and fast to adjust for different wood widths, as well. It’s a simple movement of the fence and a twist to change the bit depth and you’re done. I don’t have a vacuum attached, but dust just collects in a neat pile underneath. It’s also easier on my back, drilling a hole takes seconds and no muscle. Thank you, Kreg!!!!
Kerryks1 –
Great Machine for Production
Up to this point I’ve been using the Kreg Jig for pocket . It’s actually been a great tool and until now met my needs for the occasional pocket hole. I’ve been doing some commercial work this past year and recently needed to produce some items that would require 352 pocket holes! The jig would take a few hours to drill those and since I’ll be making these things in batches of 10 (320 holes) now and then, It was time to find a faster solution. The holes are being drilled in 2×2 stock so while faster it did take a little extra time to make sure the stock was perpendicular to the fence since only the end of the 2×2 was up against it. I added the plywood using double sided tape which allowed me to position the work piece so it was aliened every time. The net result was 176 pocket holes in less than 30 min! I adapted my shop vac to the machine and it did a great job of keeping sawdust to a minimum. The machine appears to be well built, but still light enough to hang on my shop wall when not in use. Bottom line, if you need to drill a lot of pocket holes then this is a great solution, if not, then check out the various Kreg pocket hole jigs.
Joe L. –
The right tool for the job makes a world of difference.
Went from 1 pocket hole every 30 seconds to 3 in about ten seconds. Very worth the price.Pro – Does what it’s made for quickly and well.Con – The vacuum port is rather small; you may need an adapter to connection a dust extractor. I found my vacuum was overpowered for the little port. Still, all dust was collected.
matthew m. –
Good but not perfect
This machine gets the job done. As a full time carpentry shop I can say I don’t love it or hate it. I will probably upgrade to a industrial machine at some point. But nothing will replace this for on the job custom raises panel work.Dislikes1. Machine ergonomics, the pull handle sits to far back.2. The clamping mechanism just needs a spring on the end to accommodate slight discrepancys in milled stock.3. I’m constantly re tighting my fence.Things I like1. It’s much faster than my original kreg jig.2. It’s quite.3. It’s a affordable machine for what it can do.5. Kregs unbeatable customer service which keeps me buying there products.
USA –
Will not disappoint!
My only complaint is that I waited this long to get this. I’ve eyed the Foreman up for years and hesitated just because it’s not the cheapest tool there is out there. But, just as every person says that has bought it – it’s a crazy time saver! It’s easy to use and clean and seems very durable. It’s light enough to move around and fits just about anywhere in the shop since it’s not big and bulky.
seebrewster –
Great product from a great company!
The machine is so handy and so easy to use. I ended up having slight problem with my machine and Kreg’s customer service made it right.
Mark Hooper –
I recently used the Foreman Pocket Hole Machine for the first time, and it was an amazing experience! As someone who enjoys woodworking, I was thrilled with how easy it was to use. The setup was straightforward, and the instructions were clear, making it perfect for beginners and pros alike.The machine itself is sturdy and well-built. It drilled pocket holes quickly and precisely, which saved me a lot of time compared to doing it manually. The adjustable features allowed me to get the exact angle and depth I needed for different projects, ensuring strong and clean joints every time.One of the best parts was the dust collection system, which kept my workspace clean and free from sawdust. It made the whole process much more enjoyable and less messy. The machine also felt safe to use, with secure clamps holding the wood in place while drilling.Overall, my first experience with the Foreman Pocket Hole Machine was fantastic. Itâs efficient, easy to use, and produces professional results. I highly recommend it to anyone looking to improve their woodworking projects. Five stars!
Miguel M. –
es mo mejor en kreg y mucho mas rápido para darte gusto fabricando cocinas integrales
Abiud pacheco de León –
Fácil de usar
David Kim –
This is mainly for drawer. Easy use, fast and accurate. Working efficiency is very high
Attila –
A must have in a woodworking shop