BORA NGX Saw Plate RT Circular Saw Guide, For Straight Cuts, designed for use with Bora NGX and WTX Clamp Edge System, Adjustable to fit most Circular Saws 546001
Original price was: $49.00.$35.98Current price is: $35.98.
Price: $49.00 - $35.98
(as of Sep 26, 2025 23:37:31 UTC – Details)
BORA NGX Saw Plate RT Circular Saw Guide, For Straight Cuts, designed for use with Bora NGX and WTX Clamp Edge System, Adjustable to fit most Circular Saws 546001
Tool Free Saw Mounting with new quick lock mechanism – Easy to install saw, locks in without screws or tools. This revolutionary new saw mounting system features a quick lock mechanism that makes it easy to mount your circular saw and move quickly from one project to another.
Get track saw like accuracy with your circular saw – With the NGX Saw Plate 546001 you’ll get track saw like results while using your existing circular saw. Get straight cuts every time!
Adjustable to fit most circular saws – The BORA Tool NGX Saw Plate RT Circular Saw Guide is adjustable to fit most makes and models of circular saws.
Make every cut smooth and clean – The Saw Plate ensures accurate cuts make your job easier and faster. Get the best results and eliminate wasting material with off cuts!
Compatible with Bora NGX and WTX saw guides – Pair the BORA NGX Saw Plate RT with any of the BORA WTX and NGX Clamp Edges to create a complete circular saw guide system!
Customers say
Customers find the circular saw guide to be of good quality and easy to use. However, the clamping strength and functionality receive mixed feedback – while some say it attaches easily, others report it doesn’t hold the saw tight enough and doesn’t work properly. Moreover, the fit and assembly quality are also mixed, with some saying it works with both circular saws while others report it doesn’t fit at all. Additionally, the sturdiness receives negative feedback, with customers describing it as flimsy.
12 reviews for BORA NGX Saw Plate RT Circular Saw Guide, For Straight Cuts, designed for use with Bora NGX and WTX Clamp Edge System, Adjustable to fit most Circular Saws 546001
Add a review
Related Products
Original price was: $49.00.$35.98Current price is: $35.98.
Boo Mullarky –
Love it
Easy to get your saw in and out. Fits in like a glove with the Bora NGX rail. Moves smoothly along the rail and guides straight. Much, much better system than the Kreg Accu Cut. Great alternative to expensive track saw systems. I also recommend the Bora Router Guide that you can use with their rails. Cut many superbly accurate dados with that one.
Radix –
Super Accurate
I used this for cuts on a large cabinetry project for my garage. I used maple ply and needed to be super careful with my cuts as the sheets ran about $80.This locked onto my cordless Milwaukee perfectly. It’s super easy to lock in and then remove the saw quickly. I looked at the Kreg version of this but didn’t like that you had to mount it with set screws.Seems to be made out of very durable plastic, with a rubber grip surface. It’s heavier than I expected (in a good way). I dropped it a few times accidentally and there wasn’t any damage or issues with accuracy that I noticed.
The Deleted User I/O –
Great Idea Love it except the choosing process
I wanted to share my experience with using BORA tools recently. Overall, I have been very impressed with the products they offer. However, I believe there are a few areas where improvements can be made.Firstly, I feel that BORA tends to release their products too early in the design phase. This can make it difficult to determine which item is the newest model, as they frequently change and upgrade their products. For instance, when I purchased the first item, 544001, it was good, but I encountered an issue with it not accommodating the newer battery-powered circular saw. The battery blocked the rear clamp from engaging and being grabbed by hand. As a result, I had to return that item and purchase a different one that worked with my circular saw. I’m happy to say that this particular model worked wonderfully, although I did face some challenges with the rails. Thankfully, BORA quickly sent out a solution based on my suggestions, which resolved the issue. After applying the new parts, I had no hassle and the tool worked like a charm.While I appreciate the responsiveness of the company to inquiries and their willingness to listen to customer feedback, I do believe there is room for improvement. Specifically, I think the design could have been sturdier and could benefit from some sort of frame to enhance stability during setup. Additionally, I found the setup process itself to be quite challenging, partly because BORA lacks comprehensive instructions for their products. These factors are why I have deducted one star from my rating.Despite these shortcomings, I genuinely believe that BORA is a promising company and is heading in the right direction. They are receptive to feedback and even implement changes if they make sense. Granted, they may be a younger company, but they have the potential to grow and improve. I fully support them and look forward to reviewing more of their products in the future.For those considering purchasing a BORA tool, I recommend thoroughly examining their full lineup to ensure compatibility with your particular model saw. In my case, I used a RIDGID 18V BRUSHED 6-1/2 IN CIRC SAW (Model Name: R8655). Unfortunately, it did not work with the first model (544001), but it did work with the one I eventually purchased here.Thank you for your attention, and feel free to reach out if you have any questions or need further clarification.
Brad –
Not thrilled with this product
The issue may be a biological one (between my brain and the product) but the saw continues to slip around so the measurement is continuously off and sometimes halfway through the cut. I have tried putting in a stop block to help but that didn’t help either.With it slipping, the distance from the edge of the board to the Bora straight edge – the width between the edge of the guide to the blade continuously changes. My cuts are continuously off by 1/16th – 1/8th of an inch.For now, I’m just using the straight edge but not returning the product to see if I can figure out why this is happening. This isn’t that complicated.
Nickolas A. –
Works great
Been doing floating shelves and this tool with the guide works great. Helps make some really striaght cuts.
Thomas Shaw –
Avoid at all costs.
Cheap piece of plastic junk. Does not fit the saw well and will not stay fastened to the saw. Avoid at all costs. Spend the extra money for a better tool. I’d give this thing zero stars if I could.
Leo G –
Appears to be good quality
I have not use yet but it appears to be good quality and easy-to-use.
David –
Fits Most Circular Saw.
It’s made of Hard, Sturdy Plastic. Worksgreat with Bora NGX Clamp Edge. the onlyissue I have with the Bora Saw Plate is thatit did not work with my Milwaukee RearHandle Circular Saw. the shoe measure33 1/2, the Bora Saw Plate Max opening is around 31 1/2. With that said, measure the shoe of your Saw to make sure it fits the Bora Saw Plate.
Michel –
sâadapte bien
Joel bg –
Excelente plantilla se adapta muy bien a la guÃa que compré de la misma marca recomendable
Zee –
٠٠تازة بس Ùاز٠تشتر٠اÙسÙاÙدر ØÙÙا Ùا بطÙ٠٥٠اÙØ´ ا٠١٠٠اÙØ´ Ù Ùاسب ÙÙ٠بتدئÙÙ ÙÙÙÙ ÙاÙض اÙ٠٠ا عÙد٠٠ساØØ© ÙÙدرة Ùشتر٠طاÙÙØ© Ù Ùشار ÙتÙدر تستع٠ÙÙا ÙÙ Ùشار اÙدائر٠اÙÙبÙر ÙاÙصغÙر
william pocock –
Cheaply made. I bought the Bora skil saw cutting guide which this product was suppose to work with. The cutting guide was and is great. This add on is cheaply made – an expensive piece of junk.