VEVOR Electrical Enclosure Box, 12” ×10” ×6”, Fiberglass Junction Box, IP66 Waterproof & Dustproof, Outdoor Electrical Box, with Mounting Plate
Original price was: $56.99.$38.99Current price is: $38.99.
Price: $56.99 - $38.99
(as of Oct 01, 2025 10:59:35 UTC – Details)
11.8 x 9.8 x 5.5″ Fiberglass Electrical Enclosure Box
The electrical box is molded from durable fiberglass reinforced polyester (FRP). With a sophisticated lock core, high-strength hinge, sealing rubber strip, and IP65 protection level to well-protect the internal electrical in harsh environments. It is ideal for protecting equipment from harsh environments and tampering. It is widely used for indoor and outdoor applications to protect circuits from liquids and corrosion, such as electricity, construction, hotel, and other industries.
key Features
Fiberglass Reinforced Polyester
The electrical box features fiberglass reinforced polyester construction with high toughness, resistance to pressure, corrosion, and rust. The enclosure is impervious to dents.
Thickened Dust Lock
The inner lock core uses metal to prevent damage caused by excessive force. The durable and reliable cabinet door lock is applied for a convenient opening with longer service life.
High Strength Hinge
The electrical box adopts reinforced hinges, which will not be damaged if it is repeatedly opened and closed, and ensure that the box door is not easily broken by extrusion.
Rubber Sealing Strip
The sealing rubber strip is close to the box door with strong sealing performance to prevent dust and raindrops from dripping into the box and causing electricity leakage.
IP 65 & Protective
The IP65 waterproof design effectively blocks splashing water, rain, dust, snow, oil into the electrical enclosure and causing damage. It keeps your equipment well-protected in harsh environments.
Effortless to Install
Galvanized back plate can be removed and installed simply with high hardness and oxidation resistance. There are t-nut mounting slots for DIN guide rails and equipment mounting plates.
【WATERPROOF SEALING STRIP】- The electrical box is sealed with rubber strips to prevent rainwater from entering and protecting internal electrical. The hinged junction box is built with an IP65 protection class and earthing screw to ensure electrical and product security.
【CONVENIENT INSTALLATION】- The fiberglass enclosure box is equipped with a removable galvanized mounting backplate and t-nut mounting slots to facilitate installing the electrical components. Complete accessories and mounting holes are easy for the installer to drill and modify.
【STURDY CONSTRUCTION】- The electrical enclosure adopts heavy-duty fiberglass reinforced polyester made by precise cutting and welding. It has stronger wear resistance and can prevent rain erosion. Superior edging technology improves the compressive strength of the electrical box.
【REINFORCED LOCK & HINGE】- The electronic equipment enclosure box features a high-quality lock core with a reliable precision structure that is not easy to fall off. The lockable door features reinforced hinges and dual quarter-turn latches to secure the fiberglass electrical enclosure.
【EXTENSIVE USE】- Fiberglass electrical box is suitable for indoor and outdoor applications to protect circuits and prevent corrosion. It is ideal for various applications ranging from industrial equipment to medical devices, such as factories, construction sites, malls, squares, residential, courtyard, etc.
Customers say
Customers find the electrical enclosure box to be of good quality, sturdy, and watertight, with one customer noting it’s perfect for wet locations. They appreciate the DIN rail options and durability, with one mentioning it won’t corrode. Installation experiences are mixed, with some finding it easy to install while others disagree. The lockability receives mixed feedback, with several customers reporting that the locks don’t work properly.
11 reviews for VEVOR Electrical Enclosure Box, 12” ×10” ×6”, Fiberglass Junction Box, IP66 Waterproof & Dustproof, Outdoor Electrical Box, with Mounting Plate
Add a review
Related Products
Original price was: $56.99.$38.99Current price is: $38.99.
GTB –
Perfect for small solar setup
I carefully chose this to fit a 100Ah LiFePO4 battery and solar controller for my mobile chicken coop. The lighter weight from it not being metal is a big bonus for this usage. It’s certainly not cheap, but it is very high quality. A metal back plate and 3 DIN rails are included. It has already been through heavy rain and did not leak. I would purchase again.I drilled holes for vents with a DC fan mount on both sides for ventilation of the solar controller since I live in Texas. After adding a breaker, ANL fuse, solid state relay, and fuse box, there’s still a bit more room for the circuit board I plan on adding later for automation.I highly recommend covering your hands and arms when drilling into this enclosure or you will end up uncomfortable for a while. A face mask wouldn’t be a bad idea either.
worked great, –
Great product to cost
Great design, easy to install. Great deliberately. The steel plate made building the box much easier
Amazon Customer –
Great NEMA enclosures
This is one solid box, I am using this on the side of a ski slope and it is holding up great. We closed the box then poured water on the boxes and they did not leak. I will update after this winter with how it’s holding up.
Ben Campbell –
Good but not perfect
The enclosure is nice and as delivered would probably be close enough to watertight for most uses. The backplane studs are actually bolts mounted through the back of the box with plastic spacers. This is probably good enough to keep most moisture out but it’s not truly water tight. The enclosure has indents for mounting feet but they are not drilled out. Once they are, there is no feature included to seal the new opening. I used caulking in each and then inserted the bolts to fix this.Also, some of the pictures when I purchased showed the bottom of the box had a plate and gasket for access. There is no such plate and the only way to get wires in/out is to cut holes again making it no longer watertight. This is less of an issue as grommets would work fine on the bottom.
AAA –
Perfect for wet locations
I decided to properly wire my above ground pool this year so I ran underground conduit and needed a box for the pump and other electrical things to plug into. This box is completely waterproof and has plenty of space inside. I was able to fit a full size outlet box along with a splitter.
dwjohnson –
Quality construction
Bought this to fabricate a generator portal for our business. Solid, secure and weather tight. Quite happy with it as the dimensions were as described.
Ted the IT Guy –
Arrived broken and dirty, apparently used.
I ordered this as a weather-proof outdoor enclosure for my swimming pool automation project. It was big enough for the various components I had selected, including a motor contactor and lighting controller. Since the unit would have Wifi connectivity, I needed a non-metallic enclosure. All my components are DIN rail mounted, so the fact that this enclosure had built-in DIN rails was a big positive.It took a little longer than expected to arrive, so you can imagine my disappointment when the first thing I noticed was the sound of numerous small parts tinkling around loose inside the box. When I opened the box, I was greeted by an oddly-shaped piece of black plastic, an apparent shard of something. It turns out it was a piece of one of the black handles. The door of the enclosure was unlocked and various nuts and bolts roamed free in the box, inside and outside of the enclosure itself. There were what looked like fingerprints and other smudges on the door of the enclosure.The door didn’t close quite right and was difficult to lock using the one good handle. The handle felt cheaply made and I was a little worried that it would break off as I tried to lock the door. I re-packaged it as best as I could and immediately started my replacement order. After ordering my replacement, I discovered that it would be at least 10 days before it would arrive, so I requested the replacement be canceled.I ended up ordering a different enclosure from a different (non-Amazon) company at a significantly increased cost, but at least it should be here in 4 days.
Ray –
Stock Status/Shipping Estimate is NOT Accurate – Otherwise its a GREAT Panel
I have ordered three of these Vevor boxes now (all different sizes). Each time I have ordered, with the specific delivery estimate being very important to my needs, all three boxes, on the day they were due to arrive, have been delayed. The update provided by Amazon is one of those “could be 3-5 days away” kind of responses. I can see this happening one time, even maybe twice… but now three times? Someone is not reporting stock availability properly or something else is wrong. You guys need to fix this!!!!As far as the box, love them. Excellent fit, finish and quality. The fiberglass-ish construction is much better then pliable plastic and easier to work with then steel and obviously won’t corrode. The provided DIN rails and mounting options for the rails is very nice and flexible. Also the way the wall mount cam legs work are terrific. They will allow you to hide the mount behind the box if desired or flare the mount legs out towards the exterior. The mount legs also act as about a 1″ stand-off to the surface behind. Which could be nice in certain situations. So if you are on the fence on these vs. a metal NEMA box, don’t hesitate. Just don’t plan on it showing up anywhere near the promised/estimate availability when you order.
Jetsss –
Einfach gesagt top.
Client d’Amazon –
tres bonne qualité
Minca Anton –
La caja se ve muy robusta pero la cerradura es un poco floja y con mal acabado por lo demás esta muy bien y muy completa.