![Carlsons Sporting Clays Speed Wrench [ 12 Gauge ] Easy Installation](https://m.media-amazon.com/images/I/51iKjtiEDDL._AC_SL1099_.jpg "Carlsons Sporting Clays Speed Wrench [ 12 Gauge ] Easy Installation")
Carlsons Sporting Clays Speed Wrench [ 12 Gauge ] Easy Installation
$23.97
Price: $23.97
(as of Oct 03, 2025 20:52:02 UTC – Details)
Carlson’s 12ga Speed Wrench is the fastest choke wrench and allows you to remove and insert chokes in just seconds. They are easy to operate using only your index finger and thumb. Simply tighten the black thumb knob on the end of the wrench and the choke can be easily removed or inserted. It works great in the field, on your bench, or in any situation when you need to get your choke tubes out quickly.
fits all 12ga chokes with a . 680 diameter or more open
allows for fast changing of choke tubes
this wrench is easy to use
works great on the course, in the field, or on the bench
Customers say
Customers find the wrench works well with all chokes and appreciate its universal design, with one mentioning it’s compatible with Muller Invector models. The tool is well-constructed, easy to use for changing chokes, and customers consider it a great value. They like its speed, with one noting it makes changing tubes quick and sure, and appreciate that it doesn’t over-tighten. The choke removal aspect receives mixed feedback.
XDMfanboy –
Saved my butt!
I had a choke tube in several years, gun hardly used, and I couldn’t get it out to save my life. I bent a strong choke wrench I had, even after trying to work PB Blaster into it. I searched the Internet for this and it came up as a leading solution. I had to really crank the knob hard that expands rubber piston within the choke, and then turn really hard, but it came free with a couple of minutes work! Stinks that I had to buy this for one use, as I learned my lesson.
Lance Johnson –
Intersting Design. Good quality.
It takes a few seconds to expand the inside nut to make the rubber flush enough to remove an installed choke. It took a few tries to find the sweet spot of how many turns on the finger nut to get it tight. So, not a speed wrench to get it set up but once it is setup correctly, the chokes fly out AND they stay attached to the wrench. So, they are less prone to being dropped AND you don’t have to spin them out with your hand in the last few turns. So, it is slow to start and faster at the finish/transfer.
SFK –
Barely used but worth having…
Barely used but offered numerous times at the gun club. Prevent cheap wrenches potentially stripping the slots. Very easy to use and happy to keep one in my gun bag…
Al In Sierra Vista, AZ –
Not a bad price
It is a decent piece of equipment and I’ve bough two at different times. If the rubber was just a little longer and the handle a tad longer, It would be great, but over all, works good so far!
jesse conner –
Hot garbage
The wrench works marginally. The rubber that grips is slick and does not adequately grab the choke tube. I was able to easily intall and remove my choke with a standard choke wrench but could barely do it with this one. I had to tighten down the srew with all of my strength and it still barely extracted the choke. Save your money.
DaveR –
Very handy, fast and uncomplicated. Extremely pleased with this product.
This thing is better than I could ever have hoped. Super fast! The friction locking design means it’s a) universal and b) not terribly fiddly when it comes to engaging/disengaging. Also, depending on how tightly you decide to lock the wrench into the choke, it also can act as a torque limiter by slipping once the choke is fully seated–have no idea if this is important but it seems like it could extend the life of your choke’s threads.Pro Tip–if using this on a double barrel gun, the handle may knock into your other barrel/barrel when the choke is fully tightened fully. This is because you will likely seat the wrench flush with the end of the choke. To fix this, take off the black knob, washer and handle and add a rubber washer over the exposed threads. Reassemble. The washer will act as a soft spacer and protect the finish on your wrench and your gun.
Amazon Customer –
It’s great for chokes that aren’t rusted in
If you have a stuck and or rusted in choke, this most likely isn’t the tool you want. Otherwise, great product for chokes/ muzzles that have been properly cared for. Has made my life as a gunsmith easier.
tahoe –
Works on chokes
I have been impressed. Itâs worked on my 12 gauge on all styles of chokes.
Sergio –
No muy buena calidad
Habs Fan –
Great device for speedy removal and installation of chokes.
BF –
It does what is suppose to. Uses friction grip. It will not work with a rusted on choke, which you shouldn’t expect it to work. Overall happy with the product.