AUXITO 194 LED Light Bulb 6000K White 168 2825 W5W T10 Wedge 24-SMD 3014 Chipsets LED Replacement Light Kit Error Free for Car Interior Dome Map Door License Courtesy Dash Lights, Pack of 10

Easy Fit, Good Light Levels
Strongly recommended, after installing and testing them.The narrative:My Gen2.5 Honda Pilot uses 194 bulbs in the corner marker lights that are integrated with the larger light housings. Part of the annual pre-winter inspect and service protocol is to check for failed bulbs. In my case, the two bulbs in the sides of the rear lamp assemblies had failed. I figured that all the bulbs came from the same time and had endured the same hours of service, so shopped carefully to find some decent LED replacements.These Auxito bulbs fit in the compact spaces in both the front and rear light assemblies. All the regular bulbs I removed had filament metal plated out on the glass envelopes, so were not very bright any more. These bright LED replacements are a very significant improvement to what are the only light sources visible from the side at night. So kind of important if you drive in the dark.I grabbed the 10-pack to upgrade several other places where 194 bulbs are used on the car. The inside door footwell bulbs are looking pretty tired. The rear HMSL needs at least two bulbs replaced too. I hope I have enough… :)One important thing to keep in mind is that these bulbs are polarity-sensitive, while the original bulbs were not. The sockets will accept the bulb base in either of two positions, but only one will actually light the LEDs. After you put the new bulb in the socket for the first time, remember to power that bulb on and make sure it’s installed in the correct direction. It might need to be removed and rotated 180º before putting it back in the socket. By my observational math and probability analysis, While I had a 50% chance of getting any one in correctly on the first try, I had a 75% chance of getting each one wrong. Easy to correct if you do so before putting everything back in place on the car.I’m pleased with the installation ease, and with the good fit in the lamp housings. The light levels are great too. The light quality is enough better than the originals that you should plan on replacing all the old bulbs at the same time. The cost for the ten-pack is less than buying a card of four conventional bulbs at the local parts store. Not a tough value decision really.

Great LED’s for driving backwards
Well these aren’t as bright as I was hoping for BUT the reason I say that is because I already had some super bright reverse led bulbs in my 2004 dodge Ram for a few years now that are 6500k and they have a bluish color to them and I don’t really like the bluish look they have. I wanted a pure white color because it gives a higher quality crisp look and the bluish to me looks cheap and not that great. So when I saw these that are 6000k I wanted to try them out and thought maybe they would also be brighter. Well they are definitely brighter than most of the reverse led bulbs your going to find and the 6000k pure white color these produce have me completely satisfied with them and they snapped right into place tightly. I most likely will never replace these with any other bulb because these are just right and will probably outlast the old truck I do hope so. But I do wish they were available in chrome and not just black since my reverse tail light lense is completly translucent and clear and you can see right to the bulb when looking at it but since the truck is black i guess it matches it fine but not the yellow led chips this bulb has on it which is more noticeable on black than it would be if chromed like my last set were. they kinda blended in more nicely with that being said. But I’ll get over that quickly since I got them for helping me when reversing in the pitch darkness and and so i don’t back into anything I didn’t see back there because the bulbs were to dim and hardly light up anything at all and are ugly yellow and old looking or blue and cheaply made looking. Also if anyone is even thinking about using white led bulbs like these for your brake lights or tail lights don’t do it! Get ones that are red colored led ones because there are many options for them on here and they will give your red lights a sorta pinkish red color that looks like the lens is sun faded. The red led bulbs will give your tails a deep red color that will look perfect and clean.

Brighter Light!
An officer will never tell you they can’t see your tags with this upgrade!! No flicker, no fade. This brand delivers light!! No disappointments here. From 194/921 tag, tail, marker or interior light replacements this is a brighter bulb option. I use them in 1980 model vehicles to current models with no issues.. may need to use tool given to open connections ever so slightly but normally pop right in like the original glass bulbs . Also safer to replace than a broken glass 194 bulb

Bright!
Perfect OEM for my 2016 ford fusion sedan. It fit exactly where the old one was mounted. All hardware included and instructions was easy to follow. They feel solid, durable, look great, and they are really bright. I see better now in the dark with the bright with no flickering LEDs. If you don’t like the yellow incandescent light I highly recommend these!

When I bought those bulbs, they were very bright compared to the manufacturer’s ones. Now after 8 months, the right-sided bulb stopped working! I had to return the original ones back. (Ford Explorer 2020)

سبق وأن جربت العديد من المنتجات والآسف تعمل لفترة بسيطة فقط ولكن هذا المنتج جدا جدا رائع