Enbrighten Z-Wave In-Wall Smart Light Switch with QuickFit and SimpleWire, Works with Google Assistant, Alexa, & SmartThings, Z-Wave Hub Required, Smart Home, 700 Series, 58433

Works with Inovelli Matter switches
I used this as an extension/remote for a Inovelli Matter switch. Works without issues. I wasn’t able to get a standard switch working despite trying various wiring combinations and settings. I believe the firmware was updated on the Inovelli White switches since then and might have better settings now that could work with traditional switches. This was a fairly low cost option to solve my problem and dimmer seems to work as well.

Easy and effective smart switch
This review is for the Add-On Switch, which works as a “slave” in a 3-way setup with a second Enbrighten switch, which works as the “master.” I found it easy to install myself and works like a charm. A few notes:The “master” switch must receive power from the breaker panel. So, you need a tester to ensure you know which switch is receiving power from the breaker. I have two of these 3-way setups at my house and in both cases it was the switch farthest away from the breaker that was receiving power from the breaker, and hence the master switch must go there. The add-on switch is installed in the secondary switch location.The master switch is also the switch that you’ll add to your smart home setup. I’m using SmartThings, and adding the master switch was as easy as scanning the QR code. No need to do it again with the add-on switch.The dimmer control is nice: just hold the up or down paddle for a moment and the light will dim. Of course, you can also ask Alexa to dim the lights.

Great Stateless Paddle Switch
This was very easy to install. I typically avoid this price point for switches and typically use relays within the electrical box on standard switches. However, this can lead to awkward situations with multi-gang switch boxes where one paddle switch is up and the other is down. Since these switches have no ‘state’ and operate as two individual buttons, you always know that clicking UP turns the light on and clicking DOWN turns the light off.There is no dimming ability, but should fit any standard switch box. Nice quality feel, but there is a short delay between interacting with the switch and having it turn the light on or off. This is typically true of any smart switch though.

Great Product, that does not last
As a consumer who has invested in home automation technology, I regret to say that my experience with the Enbrighten Z-Wave In-Wall Smart Light Switch with QuickFit and SimpleWire has been disappointing, to say the least. Despite its promises of convenience and efficiency, I’ve found myself needing to replace these switches far more frequently than anticipated.One of the primary issues I’ve encountered with these smart light switches is their durability, or lack thereof. Despite being touted as long-lasting and reliable, I’ve found that the switches tend to malfunction or fail altogether after just a couple of years of use. Whether it’s a sudden loss of connectivity, unresponsive controls, or complete system failure, the reliability of these switches leaves much to be desired.Furthermore, the need for frequent replacements adds up in terms of both time and money. Not only am I forced to spend additional funds on purchasing new switches, but I also have to invest valuable time and effort into uninstalling the old ones and installing the replacements. This becomes particularly frustrating when considering the initial investment made in setting up and integrating these smart switches into my home automation system.Additionally, the installation process, while marketed as simple and straightforward, can be cumbersome and time-consuming, especially when dealing with replacement switches. The promise of QuickFit and SimpleWire features falls short when faced with the reality of compatibility issues and the need for additional adjustments and troubleshooting.Overall, I cannot in good conscience recommend the Enbrighten Z-Wave In-Wall Smart Light Switch with QuickFit and SimpleWire to other consumers. While the concept of smart home technology is undoubtedly appealing, the lack of reliability and longevity exhibited by these switches ultimately outweighs any potential benefits they may offer. Until significant improvements are made in terms of durability and performance, I would advise exploring alternative options for home automation needs.

This thing cannot join the wifi with a pass phrase containing space nor with qr code. Does not work, poor instructions and i want to be reimbursed asap.