Freud LU82M010 10″ Heavy Duty Multi-Purpose Blade
$49.45
Price: $49.45
(as of Oct 07, 2025 05:11:22 UTC – Details)
10″ x 60T heavy duty Multi-Purpose blade
Premium TiCo Hi-Density Carbide general purpose blend for maximum performance
Freud-Made TiCo Carbide is durable and chemical-resistant for long life and razor-sharp cuts
Laser-Cut Anti-Vibration slots Drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
Customers say
Customers find this saw blade to be a great all-around tool that cuts through hardwoods like butter and makes clean, smooth cuts. They appreciate its durability, with one customer noting it handles 2-inch fir well, and consider it a good value. The burn resistance receives mixed feedback, with some customers reporting no marks while others experience issues. Customers disagree on the blade’s cutting speed.
Eduard –
Pretty good heavy-duty blade with excellent rip cut on oak, walnut, maple and 3/4 inch plywood.
The blades make very good impression by the way it looks and how it performs on table saw. I did several test cuts with this blade on my 3HP cabinet saw and I should say that for $34 that I paid to Amazon I’ve got a beautiful deal. I am going to present the quality of cuts using a scale from 1 to 10, where 1 is terrible and 10 is great. So, here it is:1. Cross cuts: Pine 8/10, walnut 9/10, red oak 9/10 and 3/4 inch birch plywood 5/102. Rip cuts: Pine 8/10, walnut 10/10, red oak 10/10 and 3/4 inch plywood 8/10. I should mention that the quality of rip cut on heavy woods like walnut, maple and oak is outstanding. Right from the saw I would glue two parts of oak boards that were just cut and a few minutes later I will not be able to find that cut line! So, ripping heavy/hardy lumber is very good task for the blade.3. The blade feels heavy and it runs quiet with no run out.Very happy that I’ve purchased this blade. I am a contractor and I do make cabinets and some furniture with custom size/shapes. My next order is walnut bedroom furniture set with a desk and some custom bookshelves. I do see a good use for this blade for the upcoming project.Update #1. Today I used this blade to rip cut several 3/4 inch plywood sheets and all rip cuts came out exceptional! Smooth cut surface, not tear outs and no burns. I was feeding plywood very fast, but it seems like the blade is OK with very fast feed rate. So, I am changing my rating for 3/4 inch plywood rip cuts from 8 out of 10 to 10 out of 10! Way to go Freud!
Dave B. –
Durable workhorse
Great blade for my delta radial arm saw. Has good manners, cuts smoothly and cleanly. Doesn’t pull too much despite the tooth angle. Not a thin kerf blade but it will stay sharp longer and tolerate the odd staple or brad in a pallet board.
PCoop –
A quality blade
This is a wonderful product, bought through Amazon due to a bit better price than other stores had listed. The blade holds a sharp edge a long time for me, and seems to be well balanced for a smooth running blade and nice cut.
Duane Marsh –
Great Blade!
Perfect! This is a heavy duty blade that is handling what I feed it right now. If you are looking for a blade the gives you a 1/8″ kerf and flat this is the one to get. I replaced my Diablo blade for this and very glad I did.
Les –
table saw blade buy
I mistakenly ordered this blade not noticing that it is full kerf. My saw is 13 amp, the advice is use a thin kerf blade. But I am very satisfied with the clean cuts. I’ve found no problems ripping 2 inch fir, it is noisier. One big plus, no wobble, so flatter cuts. The great price on this quality blade make this an exceptional buy.
Archie A. Chipps –
I didn’t buy this to chop through boards, I bought it to cut smoother dados.
All my saw blades would leave a rough v cut in the board, and all the stores selling blades only offered the same chopping blade. I had to find a blade that was better to cut a flat top, and even seeing this I could not be sure without it saying flat top blade. I really didn’t want to get stuck with another blade I already had.Just before I used this I made a wooden blade cover to get closer to the blade. I put it in and raised the saw to cut through from the bottom and had to precut where it needed to be on the bottom. I rip up logs with it that were cut to 5 1/4 thick, and made my cuts on both sides to cut clear through. Normally the saw motor would over heat and shut down if there was any dullness to the blade, but I cut though a lot of wood and made a lot of boards without the motor over heating. I just have a 1.5 horsepower motor with a small top on the saw to fit easy in the back seat of a car.I never took this blade off, and it has been a few years now, and I am still happy with it. I made one mistake of getting to close and the saw cleared out some skin in a very clean cut. Nothing to stitch up, I just waited for the skin to grow over. It healed without much of a scar, so it really dose make a clear cut with any wood. I worked with oak, spalted maple, cherry, pear, plywood, and soon dogwood. It is an advantage to cut my own wood to use for small projects and the only problem was not the blade but the saw. I is old and I replaced the rail lockdown at my own cost, and not something I expected for Craftsman, so I have no reason to buy their products, and the first day I was putting it together the blade guard was made for a different saw, so I never really had the right guard. I learn to be carful when the board warps when cutting, and most the time it don’t leave much wood while the board keep bowing in and keep cutting to get a straight edge.At least with this blade it makes the saw safer. I see the wood pinch the blade and back up and cut again clearing the path so no pinching the blade.This blade does good with cutting and clearing along the sides of the grove, so less pinch risk.
Bill A. –
Very good inexpensive, full kerf blade
I recently decided to update my old cabinet saw, treating it to new belts and a new blade. I have always liked Freud blades and decided to stick with a full kerf since this saw has a 3hp motor and a triple belt drive.The old blade had runout so I had added some stabilizer discs which helped but didnât solve the issues.The new Freud blade didnât need the stabilizers, cross cuts and rips were nice and smooth. I didnât realize how dull the old blade was until I put this new one on.I checked all the teeth before mounting it, all were good. The blade has lots of laser cut expansion slots and it runs reasonably quiet.It ripped a piece of pine stair tread well, the cut was not polished but very smooth. Cross cuts are even quicker which is to be expected.This blade has a square, flat bottom kerf which is nice when ploughing out grooves.All in all, very pleased especially considering how inexpensive it was.
mark nathenson –
nice quality
nice quality blade at a reasonable price and made in Italy.
Joe –
This is an excellent table saw blade. I was a little nervous that this full kerf blade would stall my basic Ryobi table saw but that hasn’t been an issue. I’ve ripped 2×4″ with no slow down at all, and compared to the thin kerf blade I had I no longer have problems with wood getting jammed in the thin guard support behind the blade. I have used this blade to cut melamine shelving without chipping the coating at all. So far it’s been a great improvement to my table saw.
JohnDoe –
I dislike that like a lot of products in Australia, they are overpriced here. I like that Amazon make these available to people like me in Australia.These are a really good blade, cut beautifully, like butter and are a pleasure to use. I feel confident that when I’m using the Freud blade I know I will get a good cut.I read that many people in the know already rely on Freud. I will stop now as this is beginning to sound like an infomercial.
Roman –
Gran disco, la uso para mi sierra radial de 2hp y corta tablones de encino y haya como mantequilla, no se siente que la máquina se forcé o se esfuerce. Solo queda ver cuánto es capas de retener el filo pero hasta ahora sin quejas
Mauro Davila –
Corta sin problemas barrote de pino de 2″ lo uso en una sierra de 5 hp
Peter W. Canada –
Outstanding saw blade, not one of the Big Box stores had a comparable saw blade with a full 1/8″ kerf. Used it only a couple of times, cut-surface quality is the best I’ve seen, compared to the other saw blades I use.