Gifts for Men,Damaged Screw Extractor Set-Christmas Stocking Stuffers for Men Adults Him,Mens Gifts for Dad,Husband,Stripped Screws Nuts & Bolts Drill Bit Tools for Easy Removal of Rusty Broken Screw
Original price was: $9.99.$7.99Current price is: $7.99.
Price: $9.99 - $7.99
(as of Aug 09, 2025 19:20:27 UTC – Details)
Product Description
Damaged Screw Extractor Kit and Stripped Screw Extractor Set Easily and Quickly Remove All Common Sizes of Damaged, Broken or Stripped Screws
How to Use:
Step1: Make sure to use the drill side, make sure it is counterclockwise , not too fast and not too slow, but make sure you drill deep enough. When drilling, make sure to use some force (not too much force, but not too light force) against the screw. Step2: Please make sure to use the extractor (Spiral) side, make sure it is counterclockwise (that is, the direction in which the screw is screwed out), and the speed should be slow, so that the screw can be grasped. Don’t go too fast. If you can’t grab the screw, try the extractor (Spiral) side of the large extractor instead, no need for a new hole
ADDITIONAL #2 BIT
Good news! We’ve included
an additional #2 bit. This is
the most frequently used bit
in the box
GREAT GIFT
Our incredible extractor
set is the perfect gift for
professional contractors,
carpenters & construction
crews, as well as the casual
SAFE STORAGE
Your set comes in a safe,
durable storage & travel case.
Applicable situations
STRIPPED SCREWS
RUSTED SCREWS
STUBBORN SCREWS
DAMAGED SCREWS
APPLY TO MOST DRILLS : 6 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
The DIY Tools for Men-Men won’t know they need screw extractor set until they have one! This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and Unique tool gifts for men women. The must have stocking stuffers for men, gifts for dad, husband, father, him, guy teens, adult, Boyfriend, son on Birthdays, Christmas, Fathers Day or anniversary. Perfect Holiday Gifts Guide
HIGH QUALITY – This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it’s durable and easily to remove any damaged screws.
EASY TO USE: Just two simple steps to get the job done – drill a hole with a cutting size using the right size screw extractor and easily remove the screw or bolt using the removal tool Hardness 63-65HRC: Titanium hardened steel material, more durable than most screw extractors on the market, better hardness and durability than others, buy with confidence and complete peace of mind
Cool Gadgets for Men Dad Christmas Birthday Gifts for Men and Women – Men won’t know they need screw extractor sets until they have one! Every screw has the potential to rust and break, which can create a situation where it cannot be removed. Owning it, there will be no anxiety about rusty screws. This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and unique tool gifts for men women. A must have stocking stuffer for men on birthdays, Christmas, Father’s Day or anniversaries, a gifts for dads, husbands, fathers, him, adults, boyfriends, sons. The best and most practical and surprising Christmas gifts
Customers say
Customers find the screw extractor set works well for stripped screws and appreciate its different sizes, with one customer noting it adapts to 3-12 mm screws. The tool is easy to use, with instructions printed inside the case, and customers consider it well worth the money. Durability receives mixed feedback – while some praise the high build quality, others report the head breaking off during extraction. Customers disagree on the effectiveness of the removal process.
13 reviews for Gifts for Men,Damaged Screw Extractor Set-Christmas Stocking Stuffers for Men Adults Him,Mens Gifts for Dad,Husband,Stripped Screws Nuts & Bolts Drill Bit Tools for Easy Removal of Rusty Broken Screw
Add a review
Related Products
Original price was: $9.99.$7.99Current price is: $7.99.
Amazon Customer –
Stripped ot screws were no match!
My 4 wheeler brake fluid reservoir lid had three stripped screws. I ordered the screws and the stripped screw removal kit. In five minutes I had those screws out and they worked like a charm. I highly recommend this set for stripped out screws. Very easy to read instructions plus a nice case to hold them.
OÄuz Arslan –
Gets the job done when nothing else works
Not much to say â it works. Handy little kit for stripped or rusty screws. Quality is decent, sharp enough for most jobs, and the bits feel durable enough for light to moderate use. Not pro-level, but for the price and occasional need, itâs totally worth it. Good to have around just in case
Robert F Henrick –
Did the job
Success on and old faucet screw with a disintegrated head. Canât say much about the drill side, recommend an old fashioned bit of the same diameter. But the extractor worked well. Recommended.
A. Wein –
Great product
Worked really well for my set of stripped screws. Works almost instantly. Very easy to use as well.
Jake Viers –
Worth every penny!
Why did you pick this product vs others?:I deal with stripped screws too much at work and have been really delayed because of them. I was very skeptical at first if this would really work. It not only really works, but works fast. I had 7 stripped screws today and this bit removed each screw in under 30 seconds. Without it I would have spent way too much time removing network equipment without damaging the network equipment I was removing. Best $8.00 I’ve spent.
Brian J. Lamb –
The worst possible tool for removing really stuck bolts or screws.
I have an old Toyota Tacoma that I have been working on. I was removing one of the fenders when a small mounting screw head snapped off, leaving the remainder of the screw in the frame. I soaked the remaining bit of the screw and the hole with PB Blaster for a week, hitting it with spray at least once and sometimes twice a day.I felt like today was as good a day as any to try to get the screw out. I again soaked the remaining bits with PB Blaster, wiped away the excess, and attempted to sink the drill side of the #1 extractor bit into the screw. It spun, but had no impact. Not wanting to potentially snap off the bit, because I know how fragile they are, I switched to a left handed drill bit that was the same size as the #1 bit in the kit. After the hole was started and I saw that I was going in straight, I switched back to the drill side of the extractor bit and got it to sink into the hole, down to the stop on the bit collar. I flipped the bit over and attempted to extract.Using a drill on a slow speed, making sure not to put too much force behind it, I saw that the bit wasn’t extracting, instead it was grinding away the metal stem of the screw. I applied slightly more pressure and saw that it was just grinding away more of the stem. I stopped with the #1 and switched to the #2 bit. This time to make sure that I wasn’t going too fast, I used a 1/4 inch collar/guide on the bit and fit the other end of the guide onto an Allen wrench. Applying minimal pressure and turning about a quarter turn at a time, I finally got the #2 bit to bite. The bit was down inside the screw and decent amount. Since the #1 hadn’t extracted and instead ground away some screw material, the #2 was seated really well in the screw body.Now with extractor seated and biting, hardly applying pressure, I pressed the allen wrench slightly to the left, and that’s all she wrote.Now the extractor bit is buried in the screw, making the job infinitely harder since you can’t drill through it.I read that a grinding bit in a dremel should be able to grind the extractor bit down and hopefully cause it to crumble. I just destroyed one grinder bit trying to get through it.Now I am looking at buying another “rescue bit” to remove the extractor bit that is broken off in the screw. I should have just left hand drilled the screw out as best I could. This thing is more of a headache than it’s worth.
Al Harm –
It really really works!
I stripped a torx screw on a pistol optic. I used this kit with my 18v Bosch cordless drill and it worked perfectly. After drilling into the head, the extractor bit delivered enough grip to break the screw free of the blue loctite I had applied to the threads when I had first installed and stripped the head of the small torx screw. I give it a 15 out of 10!!
dog –
Are the screws you have to old to catch any material?
Well I bought them to remove my old deck screws. The product did not work. But to be fair the old screws were in terrible shape. Some of the screws were practically disintegrated. I followed the instruction reversed drilled then reversed screwed but they just turned and caught no material. Probably should return them but for $10 itâs not worth it. AGAIN MY SCREWS were badly weathered so maybe in a different situation they might have helped.
I would like to think I’m a techy… –
This is a very complete kit, it comes with a great variety of sizes and sure beats the retail stores where generally for the same price you only get 2 bits.Works as it should, please use properly, drill first then use the extraction side. Skipping the first step will not yield good results, so use as it is designed!
Enrique P. –
Espero me sea de ayuda para cuando se barra un tornillo
Tim Dandu –
I had two severely stripped screws stuck in the clamp of a baby gate securing a glass railing. After several failed attempts with other tools, I bought this screw extractor as a last resort, honestly, I was skeptical it would work.To my surprise, it performed flawlessly.I carefully followed the instructions and advice from other reviewers. First, I used the burnishing end of the bit to carve a clean groove into the stripped screw. Then, with steady pressure and patience, I switched to the extractor sideâand both screws came out cleanly and completely.This tool saved me from what could have been a much bigger hassle. It turned a frustrating situation into a satisfying fix. I highly recommend this to anyone dealing with stripped or damaged screws. It works exactly as promised.
Gladiator –
Good quality well made, but does not have a larger size.screw remover.
DAWN –
These work exactly as stated and are a good price.