MoesGo WiFi Smart Wall Light Switch,Glass Panel, Multi-Control(3 Way), 2.4GHz Wi-Fi Touch Switches, Neutral Wire Required, Remote Control Smart Life/Tuya App, Work with Alexa, Google Home Black 2 Gang

Nice Switch, I’d give it 4.5 stars and round up to 5
Five stars because once installed, it operates perfectly and looks pretty cool too. I would remove half a star because it’s a little more difficult to install than it could be.Some additional things that I needed that were not included in the package:1. A 3-inch pigtail wire for the neutral connection (I was able to scrounge through my junk boxes and find a piece of wire to use).2. Correct size wire nut for neutral connection.3. Switch plate extension (spacer) plate (Everyone won’t need this, but my electrical box was too crowded to fit this new switch.4. Correct size screws for switch installation.I’m not saying that Moesgo needs to include these things, but a buyer should be aware that they may be needed.As I mentioned, the installation is a little more complicated then replacing a basic single pole switch. If you don’t know what you’re doing, I highly recommend getting an electrician to do it.Instructions provided are not all that great and assume that you know what you’re doing.Before you order the switch, you will want to verify that there is a neutral wire in the box (usually a white wire). Most modern installations will have this, but some will not. You’ll need to add a pigtail to connect the neutral wire in the box to the switch. I needed a larger size wire nut to connect the pigtail and get 4 wires on a nut.Also, you will need to verify which of the two black wires is the hot from the breaker panel and which is the wire going to the light. A voltage tester is convenient for this, although I suppose you could do it by trial and error.The Moesgo switch has a pretty fat extended portion on the back that houses the electronics and the relay. My electrical box was already very crowded and once I wired everything up I realized that it wasn’t going to fit . There just wasn’t enough room in the box to mount the switch flush to the wall. That was a little bit of a bummer because the switch would look sleeker mounted flush to the wall. To be fair, this is not a problem unique to the Moesgo switch. Pretty much any electronic switch or dimmer switch will have the same issue.I purchased this nice spacer plate and it solved my problem well:https://www.amazon.com/gp/product/B085DQ8K5J/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1One more thing. The screws supplied with the switch were not the correct thread for my standard electrical box. Luckily, the spacer that I purchased came with the correct size screws.All of that said, once the installation was complete, the switch works perfectly and flawlessly. I easily synced it with the app and with my Amazon Echo Dot. It works perfectly with Alexa and never fails.

Great product.
It work perfectly fine.

Won’t connect to Wi-Fi – factory-defective module
After multiple attempts and troubleshooting steps, I confirmed that the switch simply never activated its Wi-Fi module. I tried everything: 2.4GHz network, EZ pairing mode, power cycling, Smart Life app permissions, and verified proper wiring with both neutral and live lines connected.Although the touch panel works and the device responds to touch, the Wi-Fi icon never lights up, and the switch never broadcasts a signal for pairing. In the end, I concluded that the Wi-Fi module was factory-defective, making it useless for smart control.Very disappointing. I don’t recommend it unless the seller can guarantee prior quality control or an immediate replacement.

Amazing Whole House Conversion
I initially bought a couple single switch. Worked out well so bought more including dual switch. My only issue was that while converting a 2 gang into 1 gang is relatively easy with an low cost adapter, converting 3 into 1 was just not feasible. I opted to convert the 3 into 2 with a single switch and one double switch. Entire house is now done. Awesome product this far. Now just to judge it’s longevity. I’ll let you know in a couple of years.

Me ha salido bien el producto, pero lo que NO me gustó es que no tenga luz en los apagadores indicando si están apagados y tampoco en el icono de Wifi

El primer día programe para que apagara y prendiera a la hora deseada y sin problema, perooooooooo al día siguiente la luz encendida sola y obviamente ya no se apagaba pensé que era problema de que yo haya programado así que decidí volver a resetear de nuevo la configuración (ósea no programar el encendido y apagado a la hora deseada) y pues se encendió como 5 veces en el día así que llame a mi eléctrico de confianza pensando que tal vez algo había conectado algo mal, lo checamos y todo bien como lo indica, hasta vimos tutoriales de YouTube y ellos hacían lo mismo todo esta bien, pues no quedando con las ganas llame a otro eléctrico y checo todo y seguía bien, entonces pensé ohhh es el internet y cambie de modem el interruptor y nada seguía igual… entonces pues ya llevo 1 semana y media probándolo y el problema sigue a veces solo prende una vez, otras veces hasta 4 o 5 en fin me di a la tarea de investigar y muchas personas se quejan de este tipo de interruptores otras los aman y pues por lo que he investigado es que lo que ocasiona el show es la aplicación así que intentare con Alexa a ver como nos va y sino pues esperar a que actualicen la aplicación para que ya no pase esto mientras siga así no cambiare mi puntuación.