Siless Liner 157 (4 mm) mil 36 sqft Car Sound Deadening Closed Cell Foam & Heat Insulation mat – PE Foam Sound Deadener Material & Heat Barrier
Original price was: $49.95.$44.95Current price is: $44.95.






Price: $49.95 - $44.95
(as of Aug 10, 2025 14:20:15 UTC – Details)
Product Description



Closed Cell Foam: OIL and Waterproof LINER closed-cell polyethylene foam is the best for car, Siless with an adhesive layer 100% ensures optimum efficiency and thermal insulation that could be possibly gained. The price of 1 sqft of Siless Liner with similar characteristics is more then three times cheaper! Excellent quality for less money!!
Heat Blocker and Vibration Deadener: Effectively blocks 98% of radiant heat transfer. Siless Liner is a very versatile insulation material with excellent thermal barrier properties that will block engine, exhaust, & summer heat, ensure your vehicle stays cooler in the summer and warmer in the winter, making your ride more pleasant!
Lightweight, Waterproof: It is a waterproof light-weight thermal deadener with highly compressible closed cell foam formulation, it absolutely doesn’t absorb moisture and has no odor, and it’s flexible which make it easy to install with or without roller.
The operating temperature of the material is the same as of the rubber foam up to 215 degrees Fahrenheit.
SILESS Liner specifications: Self-adhesive foam rolls (closed cell PE foam) with waterproof glue. Thickness 157 mil / 0.157 inches / 4mm. Number of rolls in the package – 1. Total coverage area – 36 ft². Each roll size – 15.74 x 330.7 inches.
Customers say
Customers find the sound deadening material works well as an under-layer, particularly in engine bays of RVs, and effectively reduces road noise. The material adheres well to cleaned metal surfaces, is easy to apply to metal bodies, and cuts easily to shape. While customers consider it good value for money and appreciate its heat insulation properties, with one noting it helps maintain vehicle temperature, opinions about durability are mixed, with several customers reporting that it rips during installation.
13 reviews for Siless Liner 157 (4 mm) mil 36 sqft Car Sound Deadening Closed Cell Foam & Heat Insulation mat – PE Foam Sound Deadener Material & Heat Barrier
Add a review
Original price was: $49.95.$44.95Current price is: $44.95.

Sean –
Exactly what i needed!
I recently purchased the Siless Liner 314 mil 18 sqft Sound Deadening mat and I am absolutely thrilled with the results. This product is a game-changer when it comes to reducing noise and improving the overall sound quality in my vehicle. The 314 mil thickness provides excellent sound insulation, effectively blocking out road noise, engine noise, and vibrations.One of the things that really impressed me about the Siless Liner is the price. Compared to other sound deadening products on the market, this one is incredibly affordable. I was a bit skeptical at first because of the low price, but after installing it in my car, I can confidently say that it is worth every penny. The quality of the material is top-notch, and it is easy to work with during the installation process.Not only does the Siless Liner effectively reduce noise, but it also helps to improve the overall sound quality in my vehicle. The sound deadening material creates a more acoustically pleasing environment, allowing me to enjoy my music and conversations without any distractions. I have noticed a significant difference in the clarity and depth of the sound in my car since installing the Siless Liner.Overall, I highly recommend the Siless Liner 314 mil 18 sqft Sound Deadening mat to anyone looking to improve the sound quality in their vehicle. It is a cost-effective solution that delivers exceptional results. Don’t let the affordable price tag fool you – this product is a game-changer when it comes to reducing noise and enhancing the overall driving experience.
DelSol –
Great sticky power and great insulation
Love the product, have it in my cargo ven the entire area , works great as described, sticks very well, after one year of trying more doing my camper shell. Worth the price, hope they don’t increase it
stookie778 –
Works amazingly, but only if you install it correctly.
If you purchasing Siless Liner 157 mil (4 mm) Sound Deadening mat, to block unwanted sounds in your car, this is what you need to buy. But wait! It’s not the only thing you need to buy if you want to “actually” deaden sound.By itself, it will definitely block a noticeable amount of sound, and, most likely, that’s all you realistically need. But… But… If you want the Siless Liner Sound Deadening Mat to really help you take it up a few notches, to get the best sound almost bordering on soundproofing, listen up.You will have to install traditional butyl rubber first. Doesn’t have to be the Siless brand, but I’m sure they would love to sell both to you, I used both Killmat (80mil) and Noico (50mil).I have a Honda S2000. It’s a two-seater convertible sports car if you don’t know what this car is, and it’s loud when I’m driving above 60mph. I also happen to have a sound system installed as well. Other than that, the car is stock. I first installed the butyl rubber on the car’s interior sheet metal. I went all out and covered everything I could. I didn’t need to but I wanted to. I was extremely impressed with the results. But I wanted to go further. Not because I needed to but because just wanted to see what it would be like.So I bought Siless Liner 157 mil (4 mm) 36sqft Sound Deadening mat to go on top of the butyl rubber mats. I put this over every area I installed the butyl rubber. I had to be careful of clearance issues since I added a significant amount of underlayment, and you should too.If you put butyl rubber sound-deadening materials in 50% of the total interior area, you’ll hear a noticeable improvement. If you put butyl in about 80% of the total area, you’ll be even more amazed at the improvement, compared to before.I originally did all the above myself, so that’s my experience and so your mileage may vary.I then installed the Siless Liner Sound Deadening mat over every place I could even going further than I could with the butyl rubber. I used the Siles Liner in areas where butyl rubber would not have been effective, such as the roll bar hoop area and large empty cavities or holes.I covered everything I could, firewall, doors, floor pan, transmission tunnel, trunk, trunk lid, fuel tank area, rear quarter panels, and rear-wheel tunnels, in Siless Liner Sound Deadening Mat.WOW!! The Siless Liner Sound Deadening Mat was the icing on the cake! Let’s not forget, this car is a convertible sports car so it will never be a quiet ride, ever. But I can now actually have a conversation with a passenger at a normal-ish volume! This also means I can now have a normal hands-free phone call without having to plug one ear to block out the noise! My sound system sounds so much better! Just by going through the install process, I looked for any vibration, rattle, squeak, and noise-prone areas to either eliminate or reduce unwanted noise production. If you forget this step, the inside and outside of your car will rattle and buzz. I skipped this step the first time around. But did it right before I installed more butyl rubber and the improvement was impressive, especially inside the car. Outside the car, I didn’t notice a difference until I put the last layer of Siless Liner Sound Deadening Mat. The sound deadening mat works both ways from what I can tell. If I turned up my music, as loud as I occasionally do, parked in the attached garage to the house, with the garage door closed, I would be barely able to tell the car was playing music in the garage. It sounds like it is another car, just a little bit down the street, with a very loud base. If you stand 20 feet away outside the car, the sound system is noticeable, but not obnoxious by a long shot.Get a 3 piece wood/metal roller set as well, which makes quick work of large areas.
Rob G. –
These work as intended
I would have given this five stars, but there is some lifting on some of the corners. I am not overly concerned as they are covered by the carpet in my vehicle. These applied easily and do afford a level of sound deadening.
William Collins –
Nice product
The adhesive on this product is nice and strong and even sticks to fingers but it’s easy to remove from skin. It does a pretty good job
Christian Olbek –
Easy to use
Works seamlessly-51â option nearly covered the entire cab of a (97 F-250 Ext Cab)
Geared62 –
Not Heavy Enough
I used this on the roof of my Chinese excavator. That thing was humming along quite well at many frequencies and needed to be attenuated. I bought this product for this purpose but quickly found out that it was not dense enough. While it did attenuate the noise by about 50%, the material is just not dense enough to get more out of it.I will say though that the glue they used is fantastic. If/when I remove it to install something different, itâll be a chore to take it off.
Clay Rhodes –
Noise and heat reduction in RZR
Working great on the back wall of my RZR, cuts down on a lot of the heat and noise.
Arturo G. –
El material es muy bueno, es flexible y fácil de instalar, cumple al 100% su cometido para el sonido de tu auto.Te alcanza muy bien para tus cuatro puertas internamente y exteriormente, lo recomiendo al 100%
Dwayne Glaspell –
Itâs perfect. Exactly what I wanted
Client d’Amazon –
Très bonne produit
Jestebankof –
Si buscas reducir la resonancia de la lamina debes usar primero caucho butilo y despues agregarle esta espuma encima para mejores resultados. Cumple perfectamente con su funcion que es aislar y sellar paneles, al sellar puertas mejora la acustica de los altavoces, evita vibraciones y ruidos si se usa como empaque o junta al montarlos, el adhesivo es muy fuerte, se pega excelente y es dificil removerlo, no desprende olor alguno aun con el coche cerrado todo el dia bajo el sol a 38 grados.
Filip Poplatnik –
While you install it feels great and sound deadening is effective. But adhesive after summer heat weared out..