Three-Station Edge Roller Metal Bending Tool, 0-90° Sheet Metal Bender Tool Metal Standing Seam Roofing Tools, Large Sheet Metal Bender Hand Tool Metal Roof Leak Plates for Houses, Factories

Price: $89.99
(as of Oct 06, 2025 22:54:03 UTC – Details)

Product description:

Description

This bending tool is not just an addition to your toolbox, it’s a handy companion for your creative endeavors, making every bend stable and accurate. It is made of high-strength materials with a plastic spray treatment to ensure that the tool maintains its performance over a long period. Its lightweight and portable body is designed to work flexibly in the workshop, studio, or on-site.

Details

Practical Handle: It has a comfortable grip and allows you to use or carry this bending tool with ease.

Clear Scale: It is easy for you to observe and adjust the bending width.

Round Corners: They care for your skin more than traditional square corners when you use and clean it.

How to Use

1. Lock the lift plate to the shaft leg at the desired bend height to accurately align all drum depths.

2. Grasp the tool by the handle and slide it onto the edge of the material. Ensure that the material fits snugly against the bottom of the tool V-shaped roller assembly.

3. Gradually apply bending pressure while rolling the tool along the edge of the material each time bending the material upwards by approximately 10-20°. For a 90° bend, you should plan to have the tool run back and forth at least 5 to 8 times.

4. Allow the outer set of rollers to slide off the bend as you reach the end of the material and then reverse direction. This will produce a more uniform bend.

Specifications

Color: Green

Style: Modern

Material: Aluminum Alloy, Carbon Steel

Surface Treatment: Plastic Spraying

Mount Type: Freestanding

Control Type: Manual

Assembly Required: Yes

Applicable Bending Angle: 0-90°

Applicable Material Thickness: 0.3-1mm/ 0.012-0.04 in

Recommended Folding Height: 13-130mm/ 0.51-5.12 in

Product Size: 34*9.5*26cm/ 13.39*3.74*10.24 in

Gross Weight: 4.7kg/ 10.36 lbs

Net Weight: 3.7kg/ 8.16 lbs

Package Included

1* Bending Tool

1* Handle

2* Plugs
Sturdy and Durable: The metal bending tool is made of high-quality aluminum alloy and carbon steel, using plastic spraying technology, with high strength, wear resistance, and long service life
Helpful Assistant: The sheet metal bender is used to form 0-90° bends in sheet metal thickness from 0.3-1.0 mm and folds height from 0.51-5.12 inches to easily meet your work requirements, getting a clean and crisp bend
Thoughtful Design: Its three-position ball design can make the rebar bender bend evenly to the highest end of the length of the straight plate, making the bending more stable and uniform without length limitations, and more suitable for bending metal roof leak plates and guide plates of houses, factories, etc
Adjustable Design: Knobs on the side easily secure the lift plate to ensure the desired bending height is achieved. The center roller station can also be adjusted independently to make mild-angled bends on a curve
Easy to Carry & Store: Compact (13.39*3.74*10.24 inches) and lightweight (9.7 lbs), this edge roller metal bending tool allows you to carry it with you or store it in your boot without taking up too much space, so you can carry out your work at any time