YONICO Tongue and Groove Router Bits Set Up to 3/4-Inch Stock 1/2″ Cutting Depth 2 Bit Set 1/4-Inch Shank for Edge-to-Edge Hardwood Flooring, Paneling, Cabinet Door, Plywood Sheathing 15221q
$38.95
Price: $29.99 - $38.95
(as of Oct 04, 2025 07:13:48 UTC – Details)
This tongue and groove set will cut joints for stock up to 3/4″ thick with the groove measuring 1/4″ thick by 1/2″ deep. This set contains two bits – one for the tongue and one for the groove – so there is no need to reassemble the bits for the tongue or groove cut. This set features triple wing cutters, an adjustable tongue cutter bit for setting the joints tightness and 1/4″ shanks.Highlights:- Create tongue & groove joints for projects such as flooring, rail and stile and many more- Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge- For use on table mount router- Silver induction brazing for maximum strength and durability- Includes 2 matching tongue & groove router bits with extra shims- Manufactured with anti-kickback design to help prevent workshop mishapsItem Includes:2 Router Bits and Wooden Storage CaseA tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and tabletops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Align the bearing with your fence using a straight edge. Make multiple passes increasing the cutting depth by 1/8″ for each pass until you achieve full depth. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. These high quality router bits will serve you well for many projects. For best results, use with solid wood only.
Is Discontinued By Manufacturer : No
Product Dimensions : 6.25 x 5.25 x 3 inches; 1.26 Pounds
Item model number : 15221q
Date First Available : January 24, 2013
Manufacturer : Yonico
ASIN : B00KZM292A
Best Sellers Rank: #26,276 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #6 in Joinery Router Bits
Customer Reviews: 4.5 4.5 out of 5 stars 1,787 ratings var dpAcrHasRegisteredArcLinkClickAction; P.when(‘A’, ‘ready’).execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( ‘acrLink-click-metrics’, ‘click’, { “allowLinkDefault”: true }, function (event) { if (window.ue) { ue.count(“acrLinkClickCount”, (ue.count(“acrLinkClickCount”) || 0) + 1); } } ); } }); P.when(‘A’, ‘cf’).execute(function(A) { A.declarative(‘acrStarsLink-click-metrics’, ‘click’, { “allowLinkDefault” : true }, function(event){ if(window.ue) { ue.count(“acrStarsLinkWithPopoverClickCount”, (ue.count(“acrStarsLinkWithPopoverClickCount”) || 0) + 1); } }); });
Create tongue & groove joints for projects such as flooring, rail and stile and many more
Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge
For use on table mount router only
Silver induction brazing for maximum strength and durability
Satisfaction Guaranteed & Limited Lifetime Warranty
Customers say
Customers find the router bits work well, with one mentioning success with western red cedar, and they appreciate their quality, sharpness, and value for money. The bits are easy to set up and fit well, with one customer noting a snug fit on 3/4″ plywood. Durability and vibration performance receive mixed reviews – while some say they hold up well and have no vibration, others report they break after 3 uses and shake like a jet engine.
13 reviews for YONICO Tongue and Groove Router Bits Set Up to 3/4-Inch Stock 1/2″ Cutting Depth 2 Bit Set 1/4-Inch Shank for Edge-to-Edge Hardwood Flooring, Paneling, Cabinet Door, Plywood Sheathing 15221q
Add a review
Related Products
$38.95
Ward Hawley –
Simple to use/
After observing a You Tube video demonstrating tongue and Groove cabinet doors, I purchased Yonico’s tongue and groove router bits. I’ve done a lot of woodworking but have never built cabinet doors. These router bits worked well and saved me a bunch of time.First, they are easy to use. They are designed for 3/4″ stock which means adjusting the height of the bit means lining up the tongue cutter with the top of your 3/4″ rail. It may have been luck, but my first rail cut on a test piece left a 1/4″ on each side of the tongue. Likewise, when using the groove cutter you align your test piece tongue with the router bit. Again, the cut was dead on. With minimal sanding of the rails, I was ready to glue.I used 1/4″ baltic birch for the door insert. It was not as snug as the rail and stiles but was tight enough and left room for expansion.The bits easily cut through Select Pine. The edges were crisp with no tear out at a speed of 12,000 on a standard Skil router. I can’t speak to durability but for these two doors the setup and execution couldn’t have gone better. The bits are heavy and well made. This is a great value, half the cost of other brands but clearly accurate. The simplicity of use is the best characteristic.The only concern is a lack of instructions. However, with you tube there are multiple videos that will walk you through this process of building cabinets.
Jim Benson –
Wood Joining Must
I have a small woodworking shop at my home, and have recently begun to learn the fundamentals of wood joining. I had used several Yonico router bits for some decorative wood finishing, so when I began tongue and groove joining I wanted high quality router bits to help me accomplish the task. These Yonico bits offered reliable and quality performance, and provided the fastest and best finished product I could hope for. I recommend the Yonico Router Bit product line to everyone! Best of luck! Jim Benson 🙂
Mark Vermont –
Worked fine size is good
I bought these to Machine about 450 feet of one by five one by six one by seven and one by eight spruce and red pine lumber into tongue and V groove panelingRouting went fine other than you really have to tighten down hard to avoid them slipping in the collet. That sucked a bit
Kindle Customer –
Works great.
Gave this a test run and worked great. Good smooth cuts.Now that i have been using these bits to make a table I have more to say.MY test run was on 1×3 pine and the cut was perfect so i moved on to oak.I adjusted the height and adjusted the height and adjusted the height until i needed a beerand no matter how many adjustments I made I was always left with a little sliver uncut.It turns out 1×3 oak is just a sliver thicker than 3/4 pine and these bits are precise for 3/4″ wood.My bad and not a big problem. I just took off the sliver and I’m good to go.My advice…. Check your dimensions and make sure it’s exactly 3/4 before you get frustrated like I did.Stated wood dimensions are not guaranteed.Oh, The bits work great.
Senatorii –
Great Tool.
Worked well! Nice clean cuts.
Kathy Agar –
Made nice doors!
Nice and sharp. Perfectly sized parts upon assembly. Good value, not a professional, should give me years of use.
Joey –
They need to order shims if you want a tight fit
Seems to be a good quality and cuts well but the tongue is not adjusted wide enough for the grooves. I had to order shims to space the tongue to make it larger for a tight fit.
Dawnland Contracting LLC –
Tongue and groove
Used them to match existing tongue and groove boards that were not readily available premade. Worked well
Guanaquin –
Buenas brocas a un precio adecuado para uso en talleres pequeños con corridas de produccion cortas o para aficionados. La recomiendo, son de buena calidad. No estan a la altura de una Freud o Amana pero son buenas.
Jonathan Beaulieu –
Rien à dire
juan bautista galaviz campos –
Me gusta usar esta marca de brocas porque el filo dura mas que el promedio de otras brocas.Buen producto
Mario Fernandes –
This one took awhile to arrive, but mostly because it was retained on my country customs not seller fault… i’m just a DIY kinda guy, but with this set of bits i feel like a professional.
NOX –
Surprisingly cuts really well ð